Camping Stove Stand and Gas Adapter Set (Z01+Z03)

*OUTDOOR USE ONLY*
*Please confirm your gas fuel canister's valve and your gas device's connector first. Make sure your devices have right type of valve to use this product.
This stove stand Z01 can be used for backpacking stove/lantern which has EN417 Lindal Valve.
There are two types of this backpacking stove stand: High type Z01 and Low type Z02.
High type stove stand Z01 can use 4oz(110g)/8oz(227g)/16oz(450g) EN417 Lindal valve canister, nozzle type butane canister (need adapter Z11), 1lb/16oz propane tank (need adapter Z22).
Low type stove stand Z02 can use 4oz(110g)/8oz(227g) EN417 Lindal valve canister
By using this stove stand, camping stove will be much more stable and can hold bigger pot, and it is stable even on rough terrain such as mountain climbing and rocky areas.
Package include： 1pc x Stand Z01; 1pc x Space adapter Z03; 1pc x storage bag
FEATURES
BUILT-IN CHECK VALVE
This stove stand is equipped with a check-valve (self-sealing valve) & O-ring, therefore it won't leak when connect it to gas canister. (Note: Be sure to remove the adapter from the canister after using.)
The upper support (trivet)of this stove stand is made by stainless steel 304. It is notched, and the cooker that was placed on it during heating is not slippery and easy to stabilize.
RUBBER FEET
When you use this stove stand on a desk, it will not hurt the desk top.
STORAGE BAG
All parts of this stove stand can be put into attached canvas case.
This stove stand weighs only 11oz and has a load capacity of up to 22lb.
Stove Stand Z01 (High type) with spacer adapter Z03
If you need to create a space from your device to the stand, you could use spacer adapter Z03 on the top or bottom of the stand.
with propane adapter Z2
with butane adapter Z11
with two outlets adapter Z28-60
with spacer adapter Z03
How to assemble
NOTE : Package includes 1pc of Stand Z01 with storage bag & 1pc of Adapter Z03 only. The other products are not included.
Steps：
Connect centre pole & lower support (legs)：get high type legs.
Insert the upper support (trivet) into the hole on mounting part to attach it.
Connect legs to holes under the mounting part.
Confirm that there is no looseness or distortion.
This is a product compatible with isobutane screw-on type gas canister(with EN417 Lindal Valve).
Inlet : EN417 Lindal Valve Canister
Outlet : EN417 Lindal Valve
Please note that if you use this adapter to a canister which doesn't match, it may cause problems in use.